TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,962 FT ELB2,961 FT ELCastileCastileDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring SandField Penetration PointField Penetration Point

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AState Cordell 42/4 #W201DM
  • BState Cordell 42/4 #W102DM
FormationAB
Castile711 MD 2,251CASTILLE706 MD 2,255CASTILLE
Delaware-965 MD 3,927-968 MD 3,929
Bell Canyon-994 MD 3,956-992 MD 3,953
Cherry Canyon-1,983 MD 4,945-1,990 MD 4,951
Bone Spring-4,465 MD 7,427-4,477 MD 7,438
1ST Bone Spring Sand-5,350 MD 8,312-5,361 MD 8,322
2ND Bone Spring Sand-6,034 MD 8,996-6,053 MD 9,014
Field Penetration Point-6,821 MD 9,783-6,834 MD 9,795
Phantom Field Penetration Point—-6,834 MD 9,795
3RD Bone Spring Sand—-7,079 MD 10,040
Wolfcamp-7,377 MD 10,339—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.