TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.8 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,703 FT ELB2,695 FT ELPermian (undifferentiat…Permian (undifferentiated)CastileCastileDelaware Consolidated G…Delaware Consolidated GasFord / DelawareFord / DelawareDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADoc Brown Unit #224H
  • BDoc Seuss A #331H
FormationAB
Permian (undifferentiated)-1,112 MD 3,815PERMIAN (UNDEFINED)-1,137 MD 3,832PERMIAN (UNDEFINED)
Castile-1,112 MD 3,815CASTILLE-1,137 MD 3,832CASTILLE
Delaware Consolidated Gas-2,112 MD 4,815-2,137 MD 4,832
Ford / Delaware-2,112 MD 4,815-2,137 MD 4,832
Delaware-2,112 MD 4,815-2,137 MD 4,832
Bell Canyon-2,169 MD 4,872-2,189 MD 4,884
Cherry Canyon-3,017 MD 5,720-3,041 MD 5,736
Bone Spring-5,061 MD 7,764-5,093 MD 7,788
2ND Bone Spring Shale-6,085 MD 8,788—
Wolfcamp-7,365 MD 10,068-7,411 MD 10,106

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.