TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,887 FT ELB2,884 FT ELBell CanyonBell CanyonCherry CanyonCherry Canyon

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AEscarpa 57-T1-39X34 YB #X102H
  • BDBM 57-1-39 #1D
FormationAB
Castile—1,784 MD 1,100CASTILLE
Delaware—59 MD 2,825
Bell Canyon30 MD 2,8579 MD 2,875
Cherry Canyon-912 MD 3,799-921 MD 3,805
Bone Spring-3,770 MD 6,657—
1ST Bone Spring Sandstone-4,740 MD 7,627—
2ND Bone Spring Sandstone-5,529 MD 8,416—
3RD Bone Spring Sandstone-6,280 MD 9,167—
Wolfcamp-6,962 MD 9,849—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.