WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, 0.4 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighboring wells; nothing is interpolated. Where tops come from →

0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA3,045 FT ELLamarDelawareCherry CanyonBrushy CanyonBone Springs LimeBone Spring1ST Bone Spring1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring3RD Bone Spring Carbonate3RD Bone Spring Sand3RD Bone SpringWolfcampB3,034 FT ELCastileDelawareBell CanyonCherry CanyonBone Spring1ST Bone Spring Sand2ND Bone Spring Sand3RD Bone Spring CarbonateField Penetration Point3RD Bone Spring Sand

reported topsame formation, neighboring wellscrowded tops are unlabeled; hover a tick to read it

The tops, as filed

ASunset State E #733H 42-389-41663

EOG Resources, Inc. · Reeves · 3,045 ft elevation · 14,000 ft TD

FormationMD ftSubsea
LamarLAMAR LIMESTONE3,748-703
Delaware3,789-744
CastileCASTILLE3,789-744
Bell Canyon3,789-744
Cherry Canyon4,715-1,670
Brushy Canyon5,842-2,797
Bone SpringBONE SPRINGS LIME7,070-4,025
Bone Spring7,070-4,025
Bone Spring1ST BONE SPRING7,935-4,890
Bone Spring1ST BONE SPRING SAND7,935-4,890
Bone Spring2ND BONE SPRING SAND8,544-5,499
Bone Spring2ND BONE SPRING8,544-5,499
Bone Spring3RD BONE SPRING CARBONATE8,979-5,934
Bone Spring3RD BONE SPRING SAND9,515-6,470
Bone Spring3RD BONE SPRING9,515-6,470
Wolfcamp9,797-6,752

Mewbourne Oil Company · Reeves · 3,034 ft elevation · 10,515 ft TD

FormationMD ftSubsea
CastileCASTILLE2,362672
Delaware3,784-750
Bell Canyon3,838-804
Cherry Canyon4,733-1,699
Bone Spring7,062-4,028
Bone Spring1ST BONE SPRING SAND7,903-4,869
Bone Spring2ND BONE SPRING SAND8,543-5,509
Bone Spring3RD BONE SPRING CARBONATE8,976-5,942
Field Penetration Point9,269-6,235
Bone Spring3RD BONE SPRING SAND9,529-6,495

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.