TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,344 FT ELB2,364 FT ELWolfcampWolfcampCiscoCiscoCanyonCanyon

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #14-4
  • BTonto North 391 #2
FormationAB
Yates - High Fluids and/OR Gas F1,643 MD 701—
Yates1,643 MD 701—
San Andres - High Flows, H2S, Co827 MD 1,517—
San Andres827 MD 1,517—
Glorieta14 MD 2,330—
Clear Fork-164 MD 2,508—
Wichita Albany-1,847 MD 4,191—
Wichita-1,850 MD 4,194—
Coleman-2,329 MD 4,673—
Coleman Junction - Possible Lost-2,329 MD 4,673—
Coleman Junction-2,329 MD 4,673—
Wolfcamp-2,280 MD 4,624-3,036 MD 5,400BASE WOLFCAMP
Cisco-4,428 MD 6,772-3,586 MD 5,950CISCO SAND
Canyon-4,430 MD 6,774-4,036 MD 6,400CANYON SAND
Strawn A—-4,606 MD 6,970
Strawn 'A'—-4,606 MD 6,970
Strawn 'B'—-4,896 MD 7,260
Strawn B—-4,896 MD 7,260
Strawn "B"—-4,936 MD 7,300
Strawn 'C'—-4,986 MD 7,350
Strawn C—-4,986 MD 7,350
Lower Strawn—-5,106 MD 7,470

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.