TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 4.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000SUBSEA FTA2,245 FT ELB2,390 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichita-AlbanyWichita-AlbanyColeman JunctionColeman JunctionWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AReynolds Gartner B #2
  • BLion Diamond 'M' Unit #J 1B
FormationAB
San Andres1,011 MD 1,234SAN ANDRES - HIGH FLOWS, H2S, CO732 MD 1,658SAN ANDRES - HIGH FLOWS, H2S, CO
Yates499 MD 1,746YATES - HIGH FLUIDS AND/OR GAS F1,577 MD 813YATES - HIGH FLUIDS AND/OR GAS F
Glorieta-184 MD 2,42919 MD 2,371
Clear Fork-418 MD 2,663-168 MD 2,558
Wichita-Albany-1,666 MD 3,911WICHITA-2,467 MD 4,857
Wichita Albany - Over Pressured—-2,467 MD 4,857
Coleman Junction1,011 MD 1,234COLEMAN JUNCTION - POSSIBLE LOST-2,800 MD 5,190COLEMAN JUNCTION - POSSIBLE LOST
Wolfcamp-2,293 MD 4,538-2,800 MD 5,190

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.