TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,410 FT ELB2,428 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita Albany - Over P…Wichita Albany - Over PressuredWolfcampWolfcampColeman JunctionColeman JunctionCiscoCiscoCanyon - Active CO2 Flo…Canyon - Active CO2 Flood

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #72-7ST
  • BSacroc Unit #70-8ST
FormationAB
Yates1,681 MD 729YATES - HIGH FLUIDS AND/OR GAS F1,694 MD 734
San Andres830 MD 1,580SAN ANDRES - HIGH FLOWS, H2S, CO811 MD 1,617
Glorieta19 MD 2,3915 MD 2,423
Clear Fork-169 MD 2,579-164 MD 2,592
Wichita-1,809 MD 4,219-1,826 MD 4,254
Wichita Albany - Over Pressured-1,809 MD 4,219-1,826 MD 4,254
Wolfcamp-2,255 MD 4,665-2,304 MD 4,732
Coleman Junction-2,255 MD 4,665COLEMAN JUNCTION - POSSIBLE LOST-2,304 MD 4,732
Cisco-4,274 MD 6,684-4,325 MD 6,753
Canyon - Active CO2 Flood-4,341 MD 6,751-4,366 MD 6,794
Canyon-4,466 MD 6,876—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.