TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,366 FT ELB2,363 FT ELSan AndresSan AndresClear ForkClear ForkWolfcampWolfcampCanyonCanyon

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #344-5
  • B9202 JV-P Rosson #2
FormationAB
Yates1,504 MD 862YATES - HIGH FLUIDS AND/OR GAS F—
San Andres660 MD 1,706SAN ANDRES - HIGH FLOWS, H2S, CO721 MD 1,642
Glorieta-75 MD 2,441—
Clear Fork-264 MD 2,630-653 MD 3,016
Wichita-1,998 MD 4,364—
Wichita Albany - Over Pressured-1,998 MD 4,364—
L. Wolfcamp—-2,313 MD 4,676
Coleman Junction-2,470 MD 4,836COLEMAN JUNCTION - POSSIBLE LOST—
Wolfcamp-2,470 MD 4,836-1,806 MD 4,169
Pennsylvanian—-2,553 MD 4,916PENN. SHALE
Cisco-4,365 MD 6,731—
Canyon-4,366 MD 6,732CANYON - ACTIVE CO2 FLOOD-4,265 MD 6,628CANYON REEF

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.