TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,418 FT ELB2,352 FT ELWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #15-5
  • BTonto North 443 B-3 #3
FormationAB
Yates- High Fluids and/OR Gas FL1,639 MD 779—
Yates1,639 MD 779—
Yates - High Fluids and/OR Gas F1,639 MD 779—
San Andres820 MD 1,598—
San Andres- High Flows, H2S, Cor820 MD 1,598—
San Andres - High Flows, H2S, Co820 MD 1,598—
Glorieta10 MD 2,408—
Clear Fork-188 MD 2,606—
Wichita Albany-1,817 MD 4,235—
Wichita Albany - Over Pressured-1,817 MD 4,235—
Wichita-1,817 MD 4,235—
Coleman Junction - Possible Lost-2,285 MD 4,703—
Coleman Junction-2,285 MD 4,703—
Wolfcamp-2,285 MD 4,703-2,908 MD 5,260
Wolfcamp Shale—-2,908 MD 5,260
Canyon - Active CO2 Flood-4,342 MD 6,760—
Cisco-4,342 MD 6,760—
Canyon-4,441 MD 6,859—
Top Strawn—-4,690 MD 7,042
Top Strawn 'B'—-4,860 MD 7,212
Top Strawn B—-4,860 MD 7,212
Top Strawn C—-4,956 MD 7,308

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.