TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,485 FT ELB2,503 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita Albany - Over P…Wichita Albany - Over PressuredColeman JunctionColeman JunctionWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #163-5
  • BSacroc Unit #163-4
FormationAB
Yates1,524 MD 961YATES - HIGH FLUIDS AND/OR GAS F1,522 MD 981YATES - HIGH FLUIDS AND/OR GAS F
San Andres685 MD 1,800SAN ANDRES - HIGH FLOWS, H2S, CO672 MD 1,831SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-144 MD 2,629-136 MD 2,639
Clear Fork-327 MD 2,812-327 MD 2,830
Wichita-2,048 MD 4,533-2,031 MD 4,534
Wichita Albany - Over Pressured-2,048 MD 4,533-2,031 MD 4,534
Coleman Junction-2,506 MD 4,991COLEMAN JUNCTION - POSSIBLE LOST-2,566 MD 5,069COLEMAN JUNCTION - POSSIBLE LOST
Wolfcamp-2,506 MD 4,991-2,566 MD 5,069
Cisco-4,293 MD 6,778—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.