TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,478 FT ELB2,493 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita AlbanyWichita AlbanyWolfcampWolfcampColeman Junction- Possi…Coleman Junction- Possible Lost

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #3-05
  • BSacroc Unit #3-7A
FormationAB
Yates1,592 MD 8861,586 MD 907YATES - HIGH FLUIDS AND/OR GAS F
San Andres776 MD 1,702759 MD 1,734SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-52 MD 2,530-58 MD 2,551
Clear Fork-192 MD 2,670-208 MD 2,701
Wichita-1,876 MD 4,354-1,895 MD 4,388
Wichita Albany-1,876 MD 4,354-1,895 MD 4,388
Coleman Junction-2,299 MD 4,777—
Wolfcamp-2,299 MD 4,777-2,311 MD 4,804
Coleman Junction- Possible Lost-2,299 MD 4,777-2,311 MD 4,804COLEMAN JUNCTION - POSSIBLE LOST
Cisco-4,385 MD 6,863—
Canyon-4,398 MD 6,876—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.