TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,522 FT ELB2,524 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita Albany - Over P…Wichita Albany - Over PressuredWolfcampWolfcampColeman JunctionColeman Junction

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #9-1A
  • BSacroc Unit #19-3
FormationAB
Yates1,562 MD 960YATES - HIGH FLUIDS AND/OR GAS F1,577 MD 947
San Andres766 MD 1,756SAN ANDRES - HIGH FLOWS, H2S, CO764 MD 1,760
Glorieta-59 MD 2,581-49 MD 2,573
Clear Fork-246 MD 2,768-214 MD 2,738
Wichita-1,915 MD 4,437-1,881 MD 4,405
Wichita Albany - Over Pressured-1,915 MD 4,437-1,881 MD 4,405
Wolfcamp-2,357 MD 4,879-2,349 MD 4,873
Coleman Junction-2,357 MD 4,879COLEMAN JUNCTION - POSSIBLE LOST-2,349 MD 4,873
Canyon—-4,280 MD 6,804CANYON- ACTIVE CO2 FLOOD
Cisco—-4,281 MD 6,805

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.