TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,491 FT ELB2,485 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita AlbanyWichita AlbanyWolfcampWolfcampColeman Junction- Possi…Coleman Junction- Possible Lost

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #9-08
  • BSacroc Unit #8-7A
FormationAB
Yates1,573 MD 9181,543 MD 942YATES - HIGH FLUIDS AND/OR GAS F
San Andres781 MD 1,710744 MD 1,741SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-45 MD 2,536-96 MD 2,581
Clear Fork-235 MD 2,726-263 MD 2,748
Wichita-1,900 MD 4,391-1,901 MD 4,386
Wichita Albany-1,900 MD 4,391-1,901 MD 4,386
Coleman Junction-1,902 MD 4,393—
Wolfcamp-1,902 MD 4,393-2,369 MD 4,854
Coleman Junction- Possible Lost-1,902 MD 4,393-2,369 MD 4,854COLEMAN JUNCTION - POSSIBLE LOST
Cisco-4,409 MD 6,900—
Canyon-4,441 MD 6,932—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.