TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,422 FT ELB2,453 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita Albany - Over P…Wichita Albany - Over PressuredWolfcampWolfcampColeman JunctionColeman Junction

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASacroc Unit #254-5
  • BSacroc Unit #236-5
FormationAB
Yates1,478 MD 944YATES - HIGH FLUIDS AND/OR GAS F1,502 MD 951YATES - HIGH FLUIDS AND/OR GAS F
San Andres645 MD 1,777SAN ANDRES - HIGH FLOWS, H2S, CO658 MD 1,795SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-148 MD 2,570-143 MD 2,596
Clear Fork-360 MD 2,782-365 MD 2,818
Wichita-2,086 MD 4,508-2,038 MD 4,491
Wichita Albany - Over Pressured-2,086 MD 4,508-2,038 MD 4,491
Wolfcamp-2,537 MD 4,959-2,595 MD 5,048
Coleman Junction-2,537 MD 4,959COLEMAN JUNCTION - POSSIBLE LOST-2,595 MD 5,048COLEMAN JUNCTION - POSSIBLE LOST
Canyon-4,283 MD 6,705CANYON - ACTIVE CO2 FLOOD—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.