TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000SUBSEA FTA2,424 FT ELB2,404 FT ELYatesYatesSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkWichitaWichitaWichita Albany - Over P…Wichita Albany - Over PressuredWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALion Diamond 'M' Unit #M 5B
  • BLion Diamond 'M' Unit #J 9B
FormationAB
Yates1,508 MD 916YATES - HIGH FLUIDS AND/OR GAS F1,550 MD 854YATES - HIGH FLUIDS AND/OR GAS F
San Andres661 MD 1,763SAN ANDRES - HIGH FLOWS, H2S, CO691 MD 1,713SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-124 MD 2,548-31 MD 2,435
Clear Fork-294 MD 2,718-159 MD 2,563
Wichita-2,095 MD 4,519-2,041 MD 4,445
Wichita Albany - Over Pressured-2,095 MD 4,519-2,041 MD 4,445
Wolfcamp-2,601 MD 5,025-2,544 MD 4,948
Coleman Junction-2,663 MD 5,087COLEMAN JUNCTION - POSSIBLE LOST—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.