TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000500-0-500-1,000-1,500SUBSEA FTA1,746 FT ELB1,761 FT ELColeman JunctionColeman JunctionBreckenridge LSBreckenridge LSDog Bend LSDog Bend LS

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACook 88S #83
  • BCook 88S #84
FormationAB
Coleman Junction LS—1,063 MD 698
Coleman Junction1,050 MD 696COLEMAN JUNCTION LS1,065 MD 696
B Dothan LS—757 MD 1,004
Dothan LS748 MD 998—
Dothan Limestone748 MD 998—
T Frye Sand—661 MD 1,100
Tannehill LS535 MD 1,211—
Tannehill Limestone535 MD 1,211—
Saddle Creek—487 MD 1,274SADDLE CREEK LS
T Saddle Creek LS—486 MD 1,275
Crystal Falls LS313 MD 1,433—
Crystall Falls Limestone313 MD 1,433—
Hope LS—305 MD 1,456
Hope Sand Top276 MD 1,470—
Top Hope Sand276 MD 1,470—
Breckenridge Limestone228 MD 1,518—
Breckenridge LS228 MD 1,518—
Breckenridge LS228 MD 1,518234 MD 1,527
Swastika LS—148 MD 1,613
Palo Pinto—-1,089 MD 2,850PALO PINTO LS
Dog Ben LS-1,388 MD 3,134—
Dog Bend LS-1,388 MD 3,134-1,389 MD 3,150
Capps LS—-1,521 MD 3,282

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.