TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

800600400200-0SUBSEA FTA1,558 FT ELB1,530 FT ELTop Tannehill LSTop Tannehill LS

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACook Ranch 60S #163
  • BStasney's Cook Ranch 57 #157
FormationAB
Dothan LS—842 MD 688
Top Dothan LS825 MD 733—
Top Dothan825 MD 733—
Noodle Creek LS—778 MD 752
Top Noodle CK LS763 MD 795—
Top Noodle Creek LS763 MD 795—
Top Frye Sand670 MD 888—
Top Tannehill LS603 MD 955640 MD 890UPPER TANNEHILL SS TOP
Top Tannehill Sand603 MD 955—
L Tannehill SD—578 MD 952
Saddlecreek LS—564 MD 966
Top Saddlecreek LS540 MD 1,018—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.