TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

800600400200-0SUBSEA FTA1,540 FT ELB1,558 FT EL

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACook Ranch 58 #161
  • BCook Ranch 60S #163
FormationAB
B Dothan LS836 MD 704—
Top Dothan—825 MD 733
Top Dothan LS—825 MD 733
T Noodle CK LS776 MD 764—
Top Noodle CK LS—763 MD 795
Top Noodle Creek LS—763 MD 795
T Frye Sand697 MD 843—
Top Frye Sand—670 MD 888
B Tannehill LS616 MD 924—
T Tannehill SD610 MD 930—
Top Tannehill LS—603 MD 955
Top Tannehill Sand—603 MD 955
Top Saddlecreek LS—540 MD 1,018

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.