TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA271 FT ELB282 FT ELNacatochNacatochSaratogaSaratogaBlossom SandBlossom SandFredericksburgFredericksburgPaluxyPaluxyGlen RoseGlen Rose

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACrane A-95 #2
  • BUSA Cothrom Unit A12 #12H
FormationAB
Nacatoch-1,439 MD 1,710-1,562 MD 1,844
Saratoga Chalk-1,566 MD 1,837—
Saratoga-1,569 MD 1,840-1,958 MD 2,240
Blossom Sand-2,287 MD 2,558-1,985 MD 2,267
Blossom-2,299 MD 2,570—
Fredricksberg Lime-3,023 MD 3,294—
Paluxy-3,277 MD 3,548-3,317 MD 3,599
1ST Paluxy Sand-3,391 MD 3,662—
Fredericksburg-3,529 MD 3,800-3,072 MD 3,354
Glen Rose-3,566 MD 3,837-3,620 MD 3,902
Rodessa—-5,272 MD 5,554
James Lime—-5,880 MD 6,162
Pettit—-6,213 MD 6,495PETTET
Travis Peak—-6,475 MD 6,757

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.