TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 8.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000SUBSEA FTA3,306 FT ELB3,375 FT EL

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AColdwater -D- #1T
  • BWillclo #6
FormationAB
Stone Corral1,609 MD 1,697—
Red Cave1,471 MD 1,835—
Panhandle Lime—945 MD 2,430
Phdl Lime872 MD 2,434—
Anhydrite Marker602 MD 2,704—
Herrington456 MD 2,850—
Brown Dolomite—445 MD 2,930
Krider Dolomite366 MD 2,940—
Odell Shale238 MD 3,068—
Winfield230 MD 3,076—
Coucil Grove-62 MD 3,368—
Penn Shale-334 MD 3,640—
Upper Penn-534 MD 3,840—
Pennsylvania—-625 MD 4,000
Douglas-1,157 MD 4,463—
Douglas #3 Sand-1,256 MD 4,562—
Lower Tonkawa-1,460 MD 4,766—
Upper Tonkawa-1,460 MD 4,766—
Lansing-1,621 MD 4,927—
KC-1,898 MD 5,204—
Marmaton-2,012 MD 5,318—
Oswego-2,088 MD 5,394—
Marmathon—-2,125 MD 5,500
Cherokee-2,214 MD 5,520—
Morrow—-2,305 MD 5,680
Mississippian—-2,565 MD 5,940MISSISSIPPI

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.