TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

500-0-500-1,000-1,500-2,000-2,500SUBSEA FTA1,136 FT ELB1,184 FT ELCiscoCiscoUnidentified-County Reg…Unidentified-County Regular - DIBreckenridge Sand - Dis…Breckenridge Sand - DisposalHome Creek - DisposalHome Creek - DisposalSwastika - DisposalSwastika - DisposalJennings - DisposalJennings - DisposalStrawnStrawn

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABuffalo Bayou #4852
  • BBuffalo Bayou #1595V
FormationAB
Cisco736 MD 400CISCO SAND - DISPOSAL803 MD 381CISCO SAND - DISPOSAL
Unidentified-County Regular - DI726 MD 410792 MD 392
Breckenridge Sand - Disposal596 MD 540627 MD 557
Home Creek - Disposal456 MD 680502 MD 682
Swastika - Disposal436 MD 700481 MD 703
Unidentified-County Regular (Gas-534 MD 1,670—
Jennings - Disposal-1,119 MD 2,255-998 MD 2,182
Strawn-1,414 MD 2,550STRAWN - DISPOSAL-1,299 MD 2,483STRAWN - DISPOSAL
Caddo—-2,228 MD 3,412CADDO - DISPOSAL
Bend—-2,549 MD 3,733BEND CONGLOMERATE - DISPOSAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.