TOOLS · CROSS-SECTION · TEXAS
2 wells, subsea datum
West to east, 8.3 miles end to end. Subsea datum.
How to read it →How to read it ↓
Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.
Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.
Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.
Where tops come from →Section · 2 wells drawn
shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it
Tops by well
Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.
- AMallard #1D
- BSection 112 #1
| Formation | A | B |
|---|---|---|
| San Andres | — | 1,357 MD 510SAN ANDRES - DISPOSAL |
| Noodle Creek - Disposal | — | -783 MD 2,650 |
| Dothan Sand - Disposal | — | -973 MD 2,840 |
| Saddle Creek | — | -1,133 MD 3,000SADDLE CREEK - DISPOSAL |
| Coleman Junction | -1,185 MD 2,985 | -633 MD 2,500COLEMAN JUNCTION - CORROSIVE; PO |
| Hope - Disposal | — | -1,283 MD 3,150 |
| Flippen - Disposal | — | -1,303 MD 3,170 |
| Breckenridge - Disposal | — | -1,433 MD 3,300 |
| Crystal Falls - Disposal | — | -1,543 MD 3,410 |
| Noodle Creek Sand - Disposal | -1,697 MD 3,497 | — |
| Cisco | -2,151 MD 3,951CISCO - DISPOSAL | -823 MD 2,690CISCO (REEF, LIME, SAND) - DISPO |
| Tannehill | -2,151 MD 3,951TANNEHILL - DISPOSAL | — |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.