TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed; nothing is interpolated. Where tops come from →

AWbrr 233 #623 tops×BWbrr 233 #613 tops×
Download
800600400200-0SUBSEA FTA1,398 FT ELB1,409 FT ELFrye - DisposalFrye - DisposalFlippen - DisposalFlippen - DisposalCook - DisposalCook - Disposal

shaded: a formation down to the next one filed in both wellsfiled in one well onlyhover a top or a name to pick out one formation

Tops by well

Subsea feet, with measured depth beneath; a dash where the well has no top filed for the formation.

FormationAWbrr 233BWbrr 233
Frye - Disposal868MD 530879MD 530
Flippen - Disposal688MD 710699MD 710
Cook - Disposal644MD 754629MD 780

Add wells nearby

Around
Loading the map…
In the sectionMatchesFiltered out

Only wells with a location on file can be found by distance; a well with tops but no location can still be added by name or API number.

The tops, as filed

AWbrr 233 #62 42-447-36491

Drake Petroleum, LLC · Throckmorton · 1,398 ft elevation · 3,000 ft TD

FormationMD ftSubsea
Frye - Disposal530868
Flippen - Disposal710688
Cook - Disposal754644

BWbrr 233 #61 42-447-36751

Drake Petroleum, LLC · Throckmorton · 1,409 ft elevation · 950 ft TD

FormationMD ftSubsea
Frye - Disposal530879
Flippen - Disposal710699
Cook - Disposal780629

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.