TOOLS · CROSS-SECTION · TEXAS

2 wells, measured depth

West to east, 8.8 miles end to end. Measured depth: not every well has an elevation.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

01,0002,0003,0004,0005,000MD FTA1,370 FT ELBNO ELEVATION

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Measured depth, feet; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGentry Heirs 'D' #5
  • BClark Ranch #1684H
FormationAB
Canyon—974 CANYON SAND - DISPOSAL
Bunger - Disposal—1,068
Home Creek - Disposal—1,150
Cisco—1,349 CISCO - DISPOSAL
Sunsight - Disposal—1,630
Adams Branch - Disposal—2,386
Palo Pinto—2,620 PALO PINTO - DISPOSAL
Moran Sand - Disposal—2,764
Dog Bend Lime - Disposal—3,236
Strawn—3,612 STRAWN - DISPOSAL
Caddo4,352 CADDO LIME—
Mississippian4,700 MISSISSIPPI LIME—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.