TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

600500400300200100-0SUBSEA FTA1,353 FT ELB1,377 FT ELFrye - DisposalFrye - DisposalWolfcampWolfcampFlippen - DisposalFlippen - DisposalCook - DisposalCook - DisposalPermian (undifferentiat…Permian (undifferentiated)Swastika - DisposalSwastika - DisposalSunsight - DisposalSunsight - DisposalCiscoCisco

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABcmm 442 #5
  • BBcmm 442 #4
FormationAB
Frye - Disposal683 MD 670647 MD 730
Wolfcamp583 MD 770WOLFCAMP - DISPOSAL597 MD 780WOLFCAMP - DISPOSAL
Flippen - Disposal533 MD 820567 MD 810
Cook - Disposal463 MD 890463 MD 914
Permian (undifferentiated)363 MD 990PERMIAN - DISPOSAL327 MD 1,050PERMIAN - DISPOSAL
Swastika - Disposal323 MD 1,030287 MD 1,090
Sunsight - Disposal301 MD 1,052257 MD 1,120
Cisco263 MD 1,090CISCO - DISPOSAL197 MD 1,180CISCO - DISPOSAL
Bunger - Disposal193 MD 1,160—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.