TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA2,717 FT ELB2,608 FT ELBrown DolomiteBrown DolomiteDouglasDouglasTonkawaTonkawa

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AFrancis 5859 EXL #2H
  • BDobbs, Finsterwald #7051A
FormationAB
Brown Dolomite-1,333 MD 4,050BROWN DOLOMITE - PROD, PRESSURED-2,018 MD 4,626BROWN DOLOMITE (LOWER) - PRESSUR
Topeka-3,113 MD 5,830—
Brownsville-3,363 MD 6,080—
Pennsylvanian Sand-4,403 MD 7,120—
Douglas-3,863 MD 6,580-5,597 MD 8,205
Kansas City-5,643 MD 8,360KANSAS CITY (HOGSHOOTER)—
Cleveland-5,893 MD 8,610—
Tonkawa-4,813 MD 7,530-6,411 MD 9,019
Pennsylvanian (Marmaton)-6,893 MD 9,610—
Oswego-7,213 MD 9,930OSWEGO UPPER—
Caldwell—-8,652 MD 11,260
Britt—-8,743 MD 11,351
GW A—-8,822 MD 11,430
Gwa—-8,822 MD 11,430
GW B—-9,099 MD 11,707
GWB—-9,099 MD 11,707
GW C—-9,268 MD 11,876
GWC—-9,268 MD 11,876
GW E—-9,656 MD 12,264
Gwe—-9,656 MD 12,264
GWF—-9,812 MD 12,420
Atoka—-10,154 MD 12,762

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.