TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000SUBSEA FTA1,006 FT ELB996 FT ELTannehillTannehillCiscoCiscoThomas SandThomas SandGunsight SandGunsight SandGunsight LimeGunsight LimeCanyonCanyonBluff Creek SandBluff Creek SandStrawnStrawnKMAKMAVogstbergerVogstberger

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABonfire OV 18 #1801
  • BBonfire- Scottish Rite #1902
FormationAB
Tannehill706 MD 300-104 MD 1,100
Cisco806 MD 200-204 MD 1,200
Thomas Sand-444 MD 1,450-374 MD 1,370
Gunsight Sand-524 MD 1,530-554 MD 1,550
Gunsight Lime-1,024 MD 2,030-564 MD 1,560
Canyon-954 MD 1,960CANYON SAND-1,804 MD 2,800CANYON SAND
Bluff Creek Sand-1,174 MD 2,180-2,204 MD 3,200
Strawn-194 MD 1,200-3,004 MD 4,000
KMA-3,394 MD 4,400-3,304 MD 4,300
Vogstberger-3,674 MD 4,680-3,664 MD 4,660

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.