TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000-8,000SUBSEA FTA3,754 FT ELB3,716 FT ELSan AndresSan Andres

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACousin Willard 450 #15H
  • BRead et al Unit #6
FormationAB
Santa Rosa2,454 MD 1,300RED BED-SANTA ROSA—
Yates568 MD 3,186—
San Andres-861 MD 4,615SAN ANDRES - HIGH FLOWS, H2S, CO-834 MD 4,550
Clear Fork—-3,531 MD 7,247LOWER CLEARFORK
Wolfcamp—-5,332 MD 9,048
Strawn—-6,722 MD 10,438
Mississippian—-7,378 MD 11,094UPPER MISSISSIPPIAN
Devonian—-8,128 MD 11,844

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.