Core 2
Core 2 of 7324/8-4 was cut from 742 to 770 m, 28 m in the Reke Mbr and Akkar Mbr. The Directorate lists core samples from it as available.
- 28
- m cored · 742 to 770
- 1
- formation boundary crossed
- 4
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
4 RUNS COVERING PART OF THE INTERVAL
- DSN SDL ALAT MSFLspectral density log · micro-spherically focused log435 to 815 m
- MWD LWD - GR CAL PWD RES DEN NEUmeasurement while drilling · logging while drilling · gamma ray · caliper · pressure while drilling · resistivity · density · neutron435 to 815 m
- XRMI XSI CAST435 to 810 m
- ZOVSPzero-offset vertical seismic profile435 to 747 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/10096/cores/2, documented in the API reference.