NORWAY · WELLBORES · NPDID 10105
6507/2-7 S
Exploration · Appraisal · Plugged · Gas · Aker BP ASA · PL 261
Core 3
Core 3 of 6507/2-7 S was cut from 4,910 to 4,983.1 m, 73.1 m in the Tilje Fm and Åre Fm. The Directorate lists core samples from it as available.
- 73.1
- m cored · 4,910 to 4,983.1
- 1
- formation boundary crossed
- 11
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
11 RUNS COVERING PART OF THE INTERVAL
- LWD - GR DIR RES DEN NEU PWD -T2logging while drilling · gamma ray · directional survey · resistivity · density · neutron · pressure while drilling0 to 5,055 m
- LWD - GR RES DEN NEU DIR CAL PWDlogging while drilling · gamma ray · resistivity · density · neutron · directional survey · caliper · pressure while drilling460 to 5,140 m
- LWD - GR RES DEN NEU DIR SON CALlogging while drilling · gamma ray · resistivity · density · neutron · directional survey · sonic · caliper460 to 5,031 m
- SON DEN NEU RESsonic · density · neutron · resistivity2,850 to 5,100 m
- IS USIT CBL VDL -T2ultrasonic imager (cement and casing) · cement bond log · variable density log4,310 to 4,954 m
- BHI3D RESresistivity4,550 to 5,100 m
- NMRS GRS4,560 to 5,140 m
- SWCsidewall cores4,636 to 5,031 m
- FP FS4,642 to 5,067 m
- FPS4,642 to 5,054 m
- PS FS XHT GR -T2gamma ray4,838 to 4,953 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/10105/cores/3, documented in the API reference.