NORWAY · WELLBORES · NPDID 1036

25/2-11

Exploration · Appraisal · P&A · Oil/gas · Elf Petroleum Norge AS · Hugin · PL 112

6 documents: reports, logs, and plots →

Core 3

Core 3 of 25/2-11 was cut from 1,969 to 1,969.9 m, 0.9 m in the Frigg Fm. The Directorate lists core samples from it as available.

0.9
m cored · 1,969 to 1,969.9
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,9691,969.9 mFrigg Fm, 1,969 to 1,969.9 mFrigg FmCore 3, 1,969 to 1,969.9 mCore 33.2 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Frigg Fm1,9691,969.90.8

Every formation top in 25/2-11 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • DIL LSS GRdual induction log · long-spaced sonic · gamma ray1,935 to 2,074 m
  • DLL MSFL GRdual laterolog · micro-spherically focused log · gamma ray1,935 to 2,071 m
  • LDT CNL NGTlitho-density tool · compensated neutron log · natural gamma ray spectrometry1,935 to 2,073 m
  • CSTsidewall core sample taker1,950 to 2,055 m
  • RFTrepeat formation tester1,954 to 2,040 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/1036/cores/3, documented in the API reference.