NORWAY · WELLBORES · NPDID 1055
6507/11-4
Exploration · Wildcat · P&A · Dry · Saga Petroleum ASA · PL 062
What was run in 6507/11-4 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- WDSS completion logpdf · 255 KB
- Completion logpdf · 4 MB
- Completion report and logpdf · 12.8 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| MWD - GR RES DIR TEMPMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · TEMP temperature | 444 | 3,045 |
| ACBL VDL GRACBL acoustic cement bond log · VDL variable density log · GR gamma ray | 453 | 1,488 |
| ACBL VDL GRACBL acoustic cement bond log · VDL variable density log · GR gamma ray | 1,210 | 2,500 |
| CDL GR CALCDL compensated densilog · GR gamma ray · CAL caliper | 1,488 | 2,369 |
| DIFL LSBHC GR CALDIFL dual induction focused log · GR gamma ray · CAL caliper | 1,488 | 2,389 |
| COREGUNCOREGUN sidewall core gun | 1,525 | 2,489 |
| DIFL LSBHC GR CALDIFL dual induction focused log · GR gamma ray · CAL caliper | 2,335 | 2,518 |
| CNL CDL GR CALCNL compensated neutron log · CDL compensated densilog · GR gamma ray · CAL caliper | 2,500 | 3,041 |
| DENSITY | 2,500 | 3,041 |
| DIFL LSBHC GR CALDIFL dual induction focused log · GR gamma ray · CAL caliper | 2,500 | 3,041 |
| SPECTRALOG | 2,500 | 3,036 |
| VSPVSP vertical seismic profile | 2,501 | 3,041 |
| SHDTSHDT stratigraphic high-resolution dipmeter | 2,513 | 3,039 |
| FMT PRESSUREFMT formation multi-tester | 2,687 | 3,025 |
| COREGUNCOREGUN sidewall core gun | 2,805 | 3,033 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 436 | 36 | 444 | 0 | LOT |
| Surf.cond. | 20 | 802 | 26 | 817 | 1.49 | LOT |
| Interm. | 13 3/8 | 1,489 | 17 1/2 | 1,506 | 1.7 | LOT |
| Interm. | 9 5/8 | 2,503 | 12 1/4 | 2,518 | 1.8 | LOT |
Drilling mud
24 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 817 | 1.13 | 10 | 16.8 | Water based |
| 817 | 1.1 | 25 | 21.1 | Water based |
| 1,063 | 1.1 | 19 | 9.6 | Water based |
| 1,281 | 1.11 | 14 | 8.2 | Water based |
| 1,506 | 1.14 | 15 | 5.8 | Water based |
| 1,740 | 1.25 | 17 | 8.2 | Water based |
| 1,929 | 1.35 | 23 | 9.1 | Water based |
| 2,179 | 1.6 | 30 | 10.1 | Water based |
| 2,399 | 1.64 | 27 | 9.6 | Water based |
| 2,518 | 1.66 | 21 | 6.8 | Water based |
| 2,518 | 1.64 | 20 | 7.2 | Water based |
| 2,518 | 1.64 | 25 | 12.5 | Water based |
| 2,518 | 1.69 | 26 | 9.6 | Water based |
| 2,518 | 1.64 | 20 | 7.2 | Water based |
| 2,518 | 1.66 | 21 | 7.2 | Water based |
| 2,518 | 1.66 | 22 | 7.2 | Water based |
| 2,550 | 1.3 | 13 | 6.8 | Water based |
| 2,581 | 1.3 | 17 | 7.7 | Water based |
| 2,655 | 1.3 | 16 | 6.8 | Water based |
| 2,713 | 1.31 | 14 | 7.2 | Water based |
| 2,883 | 1.3 | 15 | 6.3 | Water based |
| 2,992 | 1.3 | 16 | 5.8 | Water based |
| 3,045 | 1.3 | 17 | 7.7 | Water based |
| 3,045 | 1.3 | 17 | 7.7 | Water based |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/1055, documented in the API reference.