NORWAY · WELLBORES · NPDID 1068

6506/12-8

Exploration · Appraisal · P&A · Oil/gas · Den norske stats oljeselskap a.s · Åsgard · PL 094

8 documents: reports, logs, and plots →

Core 2

Core 2 of 6506/12-8 was cut from 3,878 to 3,904.8 m, 26.8 m in the Garn Fm. The Directorate lists core samples from it as available.

26.8
m cored · 3,878 to 3,904.8
7
photographs
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,8783,904.8 m3,8803,8853,8903,8953,900Garn Fm, 3,878 to 3,904.8 mGarn FmCore 2, 3,878 to 3,904.8 mCore 226.8 m2,920 to 3,915 m: 7 photos. Open.7

Photographs of this core

7 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Garn Fm3,8783,904.826.8

Every formation top in 6506/12-8 →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey386 to 4,335 m
  • VELOCITYvelocity (check-shot) survey1,000 to 4,333 m
  • CBL VDL GRcement bond log · variable density log · gamma ray3,664 to 4,285 m
  • CDL CN SPLcompensated densilog · compensated neutron3,856 to 4,332 m
  • DIFL AC GR 3CALdual induction focused log · acoustic (sonic) · gamma ray3,856 to 4,331 m
  • DIPLOGdipmeter3,856 to 4,328 m
  • FMT HPformation multi-tester3,856 to 4,258 m
  • MLL DLL GRmicrolaterolog · dual laterolog · gamma ray3,856 to 4,332 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/1068/cores/2, documented in the API reference.