NORWAY · WELLBORES · NPDID 1071
6507/7-8
Exploration · Appraisal · P&A · Oil/gas · Conoco Norway Inc. · Heidrun · PL 095
Core 7
Core 7 of 6507/7-8 was cut from 2,516 to 2,525 m, 9 m in the Ror Fm. The Directorate lists core samples from it as available.
- 9
- m cored · 2,516 to 2,525
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ror Fm | 2,516 | 2,525 | 9 |
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- MWD - GR RES DIRmeasurement while drilling · gamma ray · resistivity · directional survey473 to 2,855 m
- VSPvertical seismic profile1,200 to 2,825 m
- CBL CCLcement bond log · casing collar locator2,015 to 2,530 m
- VSPvertical seismic profile2,360 to 2,600 m
- DIL MSFL SDT GR SPdual induction log · micro-spherically focused log · digital sonic tool · gamma ray · spontaneous potential2,399 to 2,828 m
- DLL LDL CNL NGL CAL GRdual laterolog · litho-density log · compensated neutron log · caliper · gamma ray2,399 to 2,828 m
- FMS GRformation microscanner · gamma ray2,399 to 2,835 m
- RFT GRrepeat formation tester · gamma ray2,439 to 2,797 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1071/cores/7, documented in the API reference.