NORWAY · WELLBORES · NPDID 126

33/12-4

Exploration · Appraisal · P&A · Oil · Mobil Exploration Norway INC · Statfjord · PL 037

11 documents: reports, logs, and plots →

Core 1

Core 1 of 33/12-4 was cut from 8,824 to 8,837 ft, 13 ft in the Brent Gp. The Directorate lists core samples from it as available.

13
ft cored · 8,824 to 8,837
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 2,689.6 TO 2,693.5 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS8,8248,837 ft8,8308,835Brent Gp, 2,689.6 to 2,693.5 mBrent GpCore 1, 8,824 to 8,837 ftCore 113 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Brent Gp2,689.62,693.54

Every formation top in 33/12-4 →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • CBLcement bond log1,189 to 2,861 m
  • CDM1,635 to 2,886 m
  • CDM AP1,635 to 2,886 m
  • ISF SONinduction spherically focused log · sonic1,635 to 2,889 m
  • VELOCITYvelocity (check-shot) survey1,635 to 2,888 m
  • FDC CNLcompensated formation density · compensated neutron log2,537 to 2,891 m
  • DLL MSFLdual laterolog · micro-spherically focused log2,560 to 2,865 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/126/cores/1, documented in the API reference.