NORWAY · WELLBORES · NPDID 134
16/7-5
Exploration · Wildcat · P&A · Dry · Esso Exploration and Production Norway A/S · PL 072
What was run in 16/7-5 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- WDSS completion logpdf · 271 KB
- CompletionReport and Completionlogpdf · 16.4 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| ISF SLS GR CALISF induction spherically focused log · GR gamma ray · CAL caliper | 106 | 470 |
| VSPVSP vertical seismic profile | 300 | 2,900 |
| CBL VDL GRCBL cement bond log · VDL variable density log · GR gamma ray | 334 | 1,264 |
| ISF BHC GR CALISF induction spherically focused log · BHC borehole-compensated sonic · GR gamma ray · CAL caliper | 459 | 1,280 |
| ISF SLS GR SP CALISF induction spherically focused log · GR gamma ray · SP spontaneous potential · CAL caliper | 1,264 | 2,350 |
| LDT CNT GR CALLDT litho-density tool · CNT compensated neutron tool · GR gamma ray · CAL caliper | 1,264 | 2,350 |
| CSTCST sidewall core sample taker | 1,366 | 2,337 |
| SHDTSHDT stratigraphic high-resolution dipmeter | 1,600 | 2,350 |
| ISF SLS GR CALISF induction spherically focused log · GR gamma ray · CAL caliper | 2,335 | 2,903 |
| LDT CNL GR CALLDT litho-density tool · CNL compensated neutron log · GR gamma ray · CAL caliper | 2,335 | 2,903 |
| SHDTSHDT stratigraphic high-resolution dipmeter | 2,335 | 2,903 |
| RFTRFT repeat formation tester | 2,375 | 2,897 |
| RFTRFT repeat formation tester | 2,583 | 2,888 |
| RFTRFT repeat formation tester | 2,603 | 2,636 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 168 | 36 | 170 | 0 | LOT |
| Surf.cond. | 20 | 458.7 | 26 | 474 | 1.91 | LOT |
| Interm. | 13 3/8 | 1,264 | 17 1/2 | 1,313 | 1.78 | LOT |
| Interm. | 9 5/8 | 2,335 | 12 1/4 | 2,368 | 2 | LOT |
| Open hole | — | 2,900 | 8 1/2 | 2,900 | 0 | LOT |
Drilling mud
38 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 420 | 1.06 | 5 | 4.8 | Water based |
| 474 | 1.15 | 7 | 7.2 | Water based |
| 474 | 1.15 | 8 | 7.2 | Water based |
| 474 | 1.15 | 8 | 8.6 | Water based |
| 474 | 1.15 | 8 | 8.6 | Water based |
| 474 | 1.15 | 8 | 7.2 | Water based |
| 474 | 1.08 | 6 | 5.3 | Water based |
| 474 | 1.08 | 6 | 5.3 | Water based |
| 474 | 1.15 | 7 | 7 | Water based |
| 474 | 1.15 | 7 | 7.2 | Water based |
| 474 | 1.15 | 7 | 7 | Water based |
| 568 | 1.07 | 6 | 8.6 | Water based |
| 900 | 1.15 | 7 | 7.5 | Water based |
| 1,200 | 1.14 | 8 | 10.5 | Water based |
| 1,280 | 1.15 | 13 | 14.4 | Water based |
| 1,280 | 1.15 | 13 | 14.4 | Water based |
| 1,280 | 1.15 | 8 | 9.5 | Water based |
| 1,280 | 1.15 | 8 | 9.5 | Water based |
| 1,302 | 1.15 | 9 | 10.1 | Water based |
| 1,579 | 1.1 | 8 | 8.1 | Water based |
| 1,986 | 1.14 | 11 | 7.7 | Water based |
| 2,310 | 1.16 | 12 | 10.5 | Water based |
| 2,350 | 1.21 | 12 | 9.5 | Water based |
| 2,350 | 1.21 | 12 | 9.5 | Water based |
| 2,350 | 1.21 | 12 | 9.5 | Water based |
| 2,350 | 1.27 | 14 | 13.4 | Water based |
| 2,350 | 1.24 | 16 | 9.5 | Water based |
| 2,350 | 1.21 | 12 | 9.5 | Water based |
| 2,350 | 1.27 | 10 | 11 | Water based |
| 2,350 | 1.27 | 14 | 13.4 | Water based |
| 2,350 | 1.24 | 16 | 9.5 | Water based |
| 2,350 | 1.27 | 10 | 11 | Water based |
| 2,510 | 1.25 | 17 | 8.1 | Water based |
| 2,580 | 1.3 | 18 | 8.6 | Water based |
| 2,590 | 1.33 | 22 | 9.6 | Water based |
| 2,644 | 1.33 | 21 | 9.6 | Water based |
| 2,886 | 1.33 | 19 | 8.1 | Water based |
| 2,900 | 1.33 | 18 | 8.1 | Water based |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/134, documented in the API reference.