NORWAY · WELLBORES · NPDID 1350

7125/1-1

Exploration · Wildcat · P&A · Oil/gas · Saga Petroleum ASA · PL 135

6 documents: reports, logs, and plots →

Core 1

Core 1 of 7125/1-1 was cut from 1,360 to 1,368 m, 8 m in the Hekkingen Fm. The Directorate lists core samples from it as available.

8
m cored · 1,360 to 1,368
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,3601,368 m1,3621,3641,366Hekkingen Fm, 1,360 to 1,368 mHekkingen FmCore 1, 1,360 to 1,368 mCore 18 m38 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Hekkingen Fm1,3601,3688

Every formation top in 7125/1-1 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile400 to 2,184 m
  • MWD - GR RESmeasurement while drilling · gamma ray · resistivity405 to 2,200 m
  • DIL LSS GRdual induction log · long-spaced sonic · gamma ray804 to 2,180 m
  • LDL CNL GRlitho-density log · compensated neutron log · gamma ray804 to 2,181 m
  • SHDL AML GRgamma ray804 to 2,183 m
  • RFT HPrepeat formation tester1,405 to 0 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/1350/cores/1, documented in the API reference.