NORWAY · WELLBORES · NPDID 1486
7228/9-1 S
Exploration · Wildcat · P&A · Oil/gas shows · Norsk Hydro Produksjon AS · PL 161
Core 6
Core 6 of 7228/9-1 S was cut from 4,300 to 4,318.7 m, 18.7 m in the Ulv Fm. The Directorate lists core samples from it as available.
- 18.7
- m cored · 4,300 to 4,318.7
- 4
- photographs
- 3
- thin sections in the interval
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ulv Fm | 4,300 | 4,318.7 | 18.7 |
Thin sections in this interval
3 ON FILE
Palynology slides made from core
0 IN THE INTERVAL
2 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- MWDmeasurement while drilling302 to 4,458 m
- DIL SDT GR AMSdual induction log · digital sonic tool · gamma ray · auxiliary measurement sonde4,177 to 4,607 m
- LDL CNL NGT MSFL AMSlitho-density log · compensated neutron log · natural gamma ray spectrometry · micro-spherically focused log · auxiliary measurement sonde4,178 to 4,607 m
- CSTsidewall core sample taker4,198 to 4,587 m
- FMS SHDT AMSformation microscanner · stratigraphic high-resolution dipmeter · auxiliary measurement sonde4,198 to 4,606 m
- RSCT4,202 to 4,400 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1486/cores/6, documented in the API reference.