NORWAY · WELLBORES · NPDID 154

1/3-1

Exploration · Wildcat · P&A · Gas · A/S Norske Shell · PL 011

10 documents: reports, logs, and plots →

What was run in 1/3-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
TS303,313
CBLCBL cement bond log711,310
BS GRC1374,745
CALICALI caliper3651,435
FDCFDC compensated formation density4054,645
IESIES induction electrical survey4083,736
VELOCITYVELOCITY velocity (check-shot) survey6094,458
CDM1,5294,757
MLLC1,5294,867
IE.71,5304,758
SWS1,5333,116
SNPSNP sidewall neutron porosity2,8194,767
CBLCBL cement bond log2,8954,583
BRIDGEPLUG-23,3373,337
PERF3,3553,359
BRIDGEPLUG-13,4803,480
PERF4,5634,565
PERF4,5734,578
PERF4,5804,581
SWS4,5884,733

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor36140361370LOT
Surf.cond.20408264150LOT
Interm.13 3/81,52917 1/21,5350LOT
Interm.9 5/83,11812 1/43,1280LOT
Liner74,5858 1/24,5930LOT

Drilling mud

9 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
4151.07420waterbased
8611.12480waterbased
1,2181.13430waterbased
1,5341.18450waterbased
2,0341.31490waterbased
2,4551.34460waterbased
3,1271.53480waterbased
3,4091.56470waterbased
4,2201.6480waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/154, documented in the API reference.