6407/2-2
Exploration · Appraisal · P&A · Gas/condensate · Saga Petroleum ASA · Åsgard · PL 074
Core 3
Core 3 of 6407/2-2 was cut from 2,479 to 2,497 m, 18 m in the Garn Fm. The Directorate lists core samples from it as available.
- 18
- m cored · 2,479 to 2,497
- 4
- photographs
- 2
- tests and fluid samples across it
- 11
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Garn Fm | 2,479 | 2,497 | 18 |
Palynology slides made from core
0 IN THE INTERVAL
2 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Tests and fluid samples across it
- DST 12,476 to 2,484 mOil 119 Sm³/d · gas 994,000 Sm³/d
- DST 1 sample2,476 to 2,484 mCondensate · sample available: yes
Logs run across it
11 RUNS COVERING PART OF THE INTERVAL
- VELOCITYvelocity (check-shot) survey398 to 3,346 m
- ACBLacoustic cement bond log1,750 to 2,676 m
- CDL CNLcompensated densilog · compensated neutron log1,954 to 2,697 m
- SPECTRALOG1,960 to 2,695 m
- DIFL LS BHCdual induction focused log · borehole-compensated sonic1,966 to 2,698 m
- DLL MLLdual laterolog · microlaterolog1,966 to 2,734 m
- HRDIP1,966 to 2,733 m
- COREGUNsidewall core gun1,975 to 2,722 m
- COREGUNsidewall core gun2,220 to 2,722 m
- FMTformation multi-tester2,462 to 2,721 m
- FMTformation multi-tester2,512 to 0 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/16/cores/3, documented in the API reference.