NORWAY · WELLBORES · NPDID 1703
25/4-6 S
Exploration · Wildcat · Suspended · Gas/condensate · Elf Petroleum Norge AS · Vale · PL 036
Core 10
Core 10 of 25/4-6 S was cut from 4,061 to 4,070 m, 9 m in the Dunlin Gp. The Directorate lists core samples from it as available.
- 9
- m cored · 4,061 to 4,070
- 3
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Dunlin Gp | 4,061 | 4,070 | 9 |
Palynology slides made from core
0 IN THE INTERVAL
4 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
3 RUNS COVERING PART OF THE INTERVAL
- DIL SLS GR LDT CNLdual induction log · gamma ray · litho-density tool · compensated neutron log3,700 to 4,170 m
- DIF AC GRacoustic (sonic) · gamma ray4,021 to 4,140 m
- DL GRgamma ray4,021 to 4,170 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1703/cores/10, documented in the API reference.