NORWAY · WELLBORES · NPDID 172

2/4-2

Exploration · Wildcat · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018

21 documents: reports, logs, and plots →

Core 7

Core 7 of 2/4-2 was cut from 10,653 to 10,657 ft, 4 ft in the Tor Fm. The Directorate lists core samples from it as available.

4
ft cored · 10,653 to 10,657
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,247 TO 3,248.3 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,65310,657 ftTor Fm, 3,247 to 3,248.3 mTor FmCore 7, 10,653 to 10,657 ftCore 74 ft17.1 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Tor Fm3,2473,248.31.2

Every formation top in 2/4-2 →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • TEMPtemperature40 to 3,305 m
  • AC GR CALacoustic (sonic) · gamma ray · caliper580 to 3,302 m
  • IELinduction electrical log580 to 3,305 m
  • FDCcompensated formation density2,865 to 3,304 m
  • LLlaterolog2,865 to 3,304 m
  • MLLmicrolaterolog2,865 to 3,304 m
  • NEU PORneutron · porosity2,865 to 3,304 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/172/cores/7, documented in the API reference.