NORWAY · WELLBORES · NPDID 173

25/8-1

Exploration · Wildcat · P&A · Oil · Esso Exploration and Production Norway A/S · Balder · PL 027

12 documents: reports, logs, and plots →

Core 2

Core 2 of 25/8-1 was cut from 5,657 to 5,715 ft, 58 ft in the Balder Fm and Sele Fm. The Directorate lists core samples from it as available.

58
ft cored · 5,657 to 5,715
1
thin section in the interval
1
formation boundary crossed
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 1,724.3 TO 1,741.9 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS5,6575,715 ft5,6705,6805,6905,7005,710Balder Fm, 1,724.3 to 1,735.8 mBalder FmSele Fm, 1,735.8 to 1,741.9 mSele FmCore 2, 5,657 to 5,715 ftCore 258 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Balder Fm1,724.31,735.811.5
Sele Fm1,735.81,741.96.1

Every formation top in 25/8-1 →

Thin sections in this interval

1 ON FILE

SectionDepthIn
44185,674.6 ftBalder Fm

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey135 to 2,600 m
  • BHC SON GR CALborehole-compensated sonic · sonic · gamma ray · caliper389 to 2,540 m
  • DIPdipmeter389 to 2,083 m
  • IESinduction electrical survey389 to 2,548 m
  • MLL CALmicrolaterolog · caliper389 to 1,915 m
  • FDCcompensated formation density1,328 to 2,540 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/173/cores/2, documented in the API reference.