NORWAY · WELLBORES · NPDID 1732
6608/10-3
Exploration · Appraisal · Suspended · Oil/gas · Den norske stats oljeselskap a.s · Norne · PL 128
Core 2
Core 2 of 6608/10-3 was cut from 2,576.4 to 2,604 m, 27.6 m in the Garn Fm. The Directorate lists core samples from it as available.
- 27.6
- m cored · 2,576.4 to 2,604
- 1
- photograph
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Garn Fm | 2,576.4 | 2,604 | 27.6 |
Palynology slides made from core
0 IN THE INTERVAL
4 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- MWDmeasurement while drilling472 to 2,920 m
- CBL VDL GRcement bond log · variable density log · gamma ray646 to 2,871 m
- SWCsidewall cores894 to 2,901 m
- VSPvertical seismic profile1,240 to 2,900 m
- CDL CNL GRcompensated densilog · compensated neutron log · gamma ray1,575 to 2,914 m
- DIPL MAC SLmultipole array acoustic · spectral gamma ray2,430 to 2,915 m
- FMT HP GRformation multi-tester · gamma ray2,498 to 2,862 m
- DLL MLL GRdual laterolog · microlaterolog · gamma ray2,539 to 2,800 m
- HRDIP GRgamma ray2,563 to 2,905 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1732/cores/2, documented in the API reference.