NORWAY · WELLBORES · NPDID 174

2/4-4

Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018

27 documents: reports, logs, and plots →

Core 3

Core 3 of 2/4-4 was cut from 10,790 to 10,817 ft, 27 ft in the Tor Fm. The Directorate lists core samples from it as available.

27
ft cored · 10,790 to 10,817
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,288.8 TO 3,297 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,79010,817 ft10,79510,80010,80510,81010,815Tor Fm, 3,288.8 to 3,297 mTor FmCore 3, 10,790 to 10,817 ftCore 327 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Tor Fm3,288.83,2978.2

Every formation top in 2/4-4 →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • DIRdirectional survey599 to 3,427 m
  • IESinduction electrical survey599 to 3,426 m
  • SGR-Cspectral gamma ray1,640 to 3,425 m
  • FDCcompensated formation density2,744 to 3,428 m
  • CBLcement bond log3,003 to 3,410 m
  • AA3,094 to 3,425 m
  • CDM3,094 to 3,427 m
  • LL-7laterolog3,094 to 3,428 m
  • MLL-Cmicrolaterolog3,094 to 3,428 m
  • SNPsidewall neutron porosity3,094 to 3,428 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/174/cores/3, documented in the API reference.