NORWAY · WELLBORES · NPDID 177

2/4-5

Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018

29 documents: reports, logs, and plots →

Core 2

Core 2 of 2/4-5 was cut from 10,168 to 10,198 ft, 30 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.

30
ft cored · 10,168 to 10,198
1
thin section in the interval
1
test or fluid sample across it
10
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,099.2 TO 3,108.4 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,16810,198 ft10,17010,17510,18010,18510,19010,195Ekofisk Fm, 3,099.2 to 3,108.4 mEkofisk FmCore 2, 10,168 to 10,198 ftCore 230 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Ekofisk Fm3,099.23,108.49.1

Every formation top in 2/4-5 →

Thin sections in this interval

1 ON FILE

SectionDepthIn
25710,191 ftEkofisk Fm

Tests and fluid samples across it

  • DST 33,107 to 3,143 mOil 483 Sm³/d · gas 111,785 Sm³/d

Full test results for the well →

Logs run across it

10 RUNS COVERING PART OF THE INTERVAL

  • IESinduction electrical survey561 to 3,321 m
  • VELOCITYvelocity (check-shot) survey595 to 3,319 m
  • SGR-Cspectral gamma ray1,639 to 3,320 m
  • SNPsidewall neutron porosity1,639 to 3,323 m
  • CCLcasing collar locator2,952 to 3,309 m
  • CBLcement bond log2,964 to 3,260 m
  • AA3,030 to 3,320 m
  • FDCcompensated formation density3,030 to 3,323 m
  • MLL-Cmicrolaterolog3,030 to 3,323 m
  • CDM3,034 to 3,323 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/177/cores/2, documented in the API reference.