NORWAY · WELLBORES · NPDID 177
2/4-5
Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018
Core 6
Core 6 of 2/4-5 was cut from 10,440 to 10,458 ft, 18 ft in the Tor Fm. The Directorate lists core samples from it as available.
- 18
- ft cored · 10,440 to 10,458
- 1
- thin section in the interval
- 2
- tests and fluid samples across it
- 10
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,182.1 TO 3,187.6 M
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Tor Fm | 3,182.1 | 3,187.6 | 5.5 |
Thin sections in this interval
1 ON FILE
| Section | Depth | In |
|---|---|---|
| 254 | 10,455 ft | Tor Fm |
Tests and fluid samples across it
- DST 13,165 to 3,204 mOil 701 Sm³/d · gas 165,696 Sm³/d
- DST 23,178 to 3,187 mOil 433 Sm³/d · gas 94,918 Sm³/d
Logs run across it
10 RUNS COVERING PART OF THE INTERVAL
- IESinduction electrical survey561 to 3,321 m
- VELOCITYvelocity (check-shot) survey595 to 3,319 m
- SGR-Cspectral gamma ray1,639 to 3,320 m
- SNPsidewall neutron porosity1,639 to 3,323 m
- CCLcasing collar locator2,952 to 3,309 m
- CBLcement bond log2,964 to 3,260 m
- AA3,030 to 3,320 m
- FDCcompensated formation density3,030 to 3,323 m
- MLL-Cmicrolaterolog3,030 to 3,323 m
- CDM3,034 to 3,323 m
Core and petrography reports on file for the well
- 5(4AX) Geochemistry of Side Wall Corespdf · 4.3 MB
- 5(4AX) Columnar Core Recordpdf · 7.1 MB
- 5(4AX) Core Analysis and Core Lithological Descriptionpdf · 3.7 MB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/177/cores/6, documented in the API reference.