NORWAY · WELLBORES · NPDID 1840

6507/2-2

Exploration · Wildcat · P&A · Gas/condensate · Norsk Hydro Produksjon AS · Marulk · PL 122

10 documents: reports, logs, and plots →

Core 6

Core 6 of 6507/2-2 was cut from 3,921 to 3,929.3 m, 8.3 m in the Åre Fm. The Directorate lists core samples from it as available.

8.3
m cored · 3,921 to 3,929.3
2
photographs
6
palynology slides made from core

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,9213,929.3 m3,9223,9243,9263,928Åre Fm, 3,921 to 3,929.3 mÅre FmCore 6, 3,921 to 3,929.3 mCore 68.3 m3,921 to 3,926 m: 1 photo. Open.13,926 to 3,929 m: 1 photo. Open.1

Photographs of this core

2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm3,9213,929.38.3

Every formation top in 6507/2-2 →

Palynology slides made from core

6 IN THE INTERVAL

DepthLab codeIn
3,922 mSTRATÅre Fm
3,923.6 mSTRATÅre Fm
3,925 mSTRATÅre Fm
3,928.5 mSTRATÅre Fm
3,929 mSTRATÅre Fm
3,929.4 mSTRATÅre Fm

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/1840/cores/6, documented in the API reference.