NORWAY · WELLBORES · NPDID 1874
34/10-35
Exploration · Appraisal · P&A · Gas/condensate · Den norske stats oljeselskap a.s · Valemon · PL 050
Core 11
Core 11 of 34/10-35 was cut from 4,057.5 to 4,063.6 m, 6.1 m in the Burton Fm. The Directorate lists core samples from it as available.
- 6.1
- m cored · 4,057.5 to 4,063.6
- 2
- photographs
- 4
- palynology slides made from core
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Burton Fm | 4,057.5 | 4,063.6 | 6.1 |
Palynology slides made from core
4 IN THE INTERVAL
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- MWDmeasurement while drilling227 to 4,310 m
- VSPvertical seismic profile753 to 4,230 m
- DIFL ACL ZDL GR CALdual induction focused log · acoustic log · compensated Z-densilog · gamma ray · caliper1,080 to 4,180 m
- DAC GRdigital array acoustic · gamma ray3,769 to 4,302 m
- DIFL ACL GR CHTdual induction focused log · acoustic log · gamma ray · cable head tension3,769 to 4,302 m
- ZDL CNL GR CAL CHTcompensated Z-densilog · compensated neutron log · gamma ray · caliper · cable head tension3,769 to 4,302 m
- DIP GRdipmeter · gamma ray3,858 to 4,302 m
- FMT GR CHTformation multi-tester · gamma ray · cable head tension3,920 to 4,288 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/1874/cores/11, documented in the API reference.