NORWAY · WELLBORES · NPDID 1906

2/7-28

Exploration · Appraisal · P&A · Shows · Phillips Petroleum Company Norway · Eldfisk · PL 018

5 documents: reports, logs, and plots →

Core 2

Core 2 of 2/7-28 was cut from 11,529 to 11,547 ft, 18 ft in the Eldfisk Fm and Haugesund Fm. The Directorate lists core samples from it as available.

18
ft cored · 11,529 to 11,547
1
formation boundary crossed
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,514 TO 3,519.5 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS11,52911,547 ft11,53511,54011,545Eldfisk Fm, 3,514 to 3,518 mEldfisk FmHaugesund Fm, 3,518 to 3,519.5 mHaugesund FmCore 2, 11,529 to 11,547 ftCore 218 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Eldfisk Fm3,5143,5184
Haugesund Fm3,5183,519.51.5

Every formation top in 2/7-28 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile1,524 to 3,840 m
  • DLL MSFL GRdual laterolog · micro-spherically focused log · gamma ray3,334 to 3,850 m
  • FMS GRformation microscanner · gamma ray3,334 to 3,839 m
  • LDL CNL NGLlitho-density log · compensated neutron log3,334 to 3,847 m
  • SDT GRdigital sonic tool · gamma ray3,334 to 3,842 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/1906/cores/2, documented in the API reference.